|
• Device |
|
|
Device Type |
Video Encoder |
|
Number of Channels |
4 |
|
• PTZ |
|
|
Protocol |
Pelco-D, Pelco-P, Dynacolor |
|
Control |
Remotely manual control; 32 preset points |
|
• Video |
|
|
Compression |
H.264 HP, MJPEG |
|
Max. Frame Rate vs. Resolution |
30 fps at 960 x 480 (NTSC); 25 fps at 960 x 576 (PAL); 30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL) |
|
Multi-Streaming |
Simultaneous dual streams based on two configurations |
|
Bit Rate |
28 Kbps - 6 Mbps (per stream) |
|
Bit Rate Mode |
Constant, Variable |
|
Image Enhancement |
Brightness, Saturation, Contrast, Sharpness |
|
Privacy Mask |
4 regions |
|
Text Overlay |
User defined text on video |
|
Image Orietation |
Image flip; image mirror |
|
• Audio |
|
|
Compression |
8 kHz, Mono, PCM, 16 bit encoding, G.711 |
|
Audio-In |
4, terminal block |
|
Audio-Out |
1, terminal block |
|
• Network |
|
|
Protocol & Service |
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP,SNMP, Bonjour |
|
Ethernet Port |
1, Ethernet (10/100 Base-T), RJ-45 connector |
|
Security |
IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1x network access control; Anonymous login |
|
• Alarm |
|
|
Alarm Trigger |
Video motion detection (3 regions); External device through digital input; Video loss; Video recovery; Scheduler; Storage removed; Failed to write storage; System is going to reboot; System booted successfully |
|
Alarm Response |
Notify control center; Go to PTZ preset point; Change image settings; Command other devices; E-mail notification with snapshots; Save video to local storage; Upload video or snapshot to FTP server; Activate external device through digital output; Change motion detection profile |
|
• Interface |
|
|
Analog Video Input |
4, CVBS, 1.0Vp-p with 75Ω BNC connector |
|
Digital Input / Output |
4 (configurable), terminal block |
|
Serial Port |
1, RS-485/RS-422, terminal block |
|
Local Storage |
MicroSDHC/MicroSDXC memory card slot (card not included) |
|
• General |
|
|
Power Source /Consumption |
PoE Class 3 (IEEE802.3af) / 3.84W DC 12V (DC 7V~20V, adapter not included) / 3.48W |
|
Weight |
462 g (1.021 Ib) |
|
Dimensions (W × H × D) |
137 mm × 35.5 mm × 121.8 mm (5.4" × 1.4" × 4.8") |
|
Operating Temperature |
-10 °C〜 50 °C (14 °F 〜 122 °F) |
|
Operating Humidity |
10% 〜85% RH |
|
Approvals |
CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B) |
|
• Integration |
|
|
Unified Solution |
Fully compatible with ACTi software |
|
ISV Integration |
Software Development Kit (SDK) available; ONVIF compliant |
|
Firmware Access Browser |
Microsoft Internet Explorer 8.0 or newer (full functionality) Safari with QuickTime installed, and other browsers with VLC installed (partial functionality) |
|
• Remote Access |
|
|
PC Web Browser |
Microsoft Internet Explorer with live view, PTZ control and setup |
|
Mobile Client Program |
Mobile device application (Active Mobile Client) supports live view and PTZ control Supported devices: iPhone, iPad, iPod Touch and Android device |
